Site icon North Country Nest

The Beginner’s Guide to Distressing Furniture the Easy Way

This beginner’s guide to distressing furniture the easy way walks you through the exact process to achieve that perfectly distressed look!

There is just something so wonderful about painting and distressing furniture. I love the way the old wood shows through the paint. I love that no two pieces ever turn out the same. I love that a newly painted piece can still have that rustic look with just some sand paper.

Distressing furniture is my absolute favorite. Not only because I love the look, but on a scale of one to amateur, it scores pretty well in the, “anyone can do this and not mess it up” category.

If you’re loving the distressed look as much as I am, but a little unsure of how to get started, I created a super quick and easy tutorial on the basics of distressing furniture. I promise it’s easy and even the most creatively challenged person can tackle it without fear!

Furniture Distressing Supplies

[this post contains affiliate links, which means we may make a small commission if a purchase is made, at no additional cost to you. see the full disclosure here.]

Easy-to-Follow Guide to Distressing Furniture

Step one. If your piece of furniture has any handles, hinges, pulleys, etc., remove those with the screwdriver or drill.

Step two. Lightly sand all surfaces of the furniture. It doesn’t need to be anything too crazy. The object of this step is to rough up the surface so the chalk paint has something to stick to. The positive of chalk paint is that it doesn’t need to go on completely unfinished wood. Some people don’t even sand their furniture before they paint, but I think it never hurts to do a quick once-over.

Step three. Wipe down the entire piece of furniture with a damp cloth or paper towel to remove all the saw dust and dirt.

Step four. After the piece is dry, paint! Depending on the look you are going for, apply however many coats are necessary. I usually like a more even and heavy cover, so I will apply two full coats and may go back a third time to touch-up some areas.

Step five. After the paint dries, grab your sand paper (again, I used 80 grit), and lightly scuff off the paint from the edges and other places that would naturally see wear and tear. Start small because it’s always easier to add more distress than to take it away. I’ve done some pieces with very minimal distressing and others with almost all of the paint taken off. This all depends on what you want and the look you are going for.

Step six. Wipe down the furniture with a damp cloth or paper towel to remove any dust.

Step seven. Apply the polyurthene topcoat. I usually use a cheap chip brush and just throw it away after I’m finished.

Step eight. Re-install the hardware (if you had any) and enjoy your newly distressed piece!

In these pictures, I still haven’t figured out the new hardware, so it’s going bare for a little bit!

Happy distressing 🙂


All our best,

Exit mobile version